Contains Tips in 25 mm PH1/2 x PH2/PH3 SL3 / SL4 /SL5 / SL-6.5 T10 / T15 / 2 x T20 / T25 / T27 / T30 / T40 T10H / T15H / T20H / T25H / T27H / T30H / T40H Adapter from 1/4 Hexagonal to 1/4 Square Magnetic...

M9201B Finishing Sander Model: M9201B Finishing Sander 1/3 Sheet 180 W High performance and durability at lower cost Ergonomic handle for easy handling in operations with one or two hands Compact and lightweight design for easy handling and high maneuverability 12,000 OPM for greater efficiency and a smooth sanding finish...

DTW700 Cordless Impact Wrench Model: DTW700 1/2″ (12.7 mm) 18v 1/2″ (12.7 mm) LXT BL Cordless Impact Wrench 700 N·m Forward/backward rotation auto stop mode. Increased rotation speed offers higher torque than DTW450. 3 reaction time modes for auto stop available in forward and reverse rotation modes. Trigger switch with...

Rotary Hammer Model: HR2470 24mm (15/16″) Convenient chisel angle positioning – 40 desired positions without adapter required. 3 modes of operation: percussion only, percussion with rotation and rotation only. Neoprene-covered handle with ergonomic design for better control. Variable speed + reversible rotation. Input power: 780W Ability: Concrete: 24mm (15/16″) Steel:...

Makita HR3001CJ 240V 30mm SDS-Plus The HR3001CJ/2 is a 240V 30mm rotary hammer with higher drilling efficiency adapted for SDS-Plus drill bits with a powerful 1,050W motor, with dial-controlled variable speed and constant speed control, to deliver up to 4,500 ipm and 3.9 J impact energy for the most demanding...

Rotary Hammer Model: HR4501C 45mm (1-3/4″) Great efficiency and speed. 2 modes of operation – percussion and percussion with rotation. 2 selectable on/off switches in demolition mode. One-touch chuck allows for easy bit change. Ergonomically designed handle with neoprene for greater control and comfort. Input power: 1,350W Day. max.of drill...

2 Modes of Operation: Percussion and Rotation with Percussion. AVT (Anti Vibration Technology) Dynamic Active Vibration Absorption, ensures performance with very low vibration. 2 selectable on/off switches in demolition mode. One-touch chuck allows easy bit change. Ergonomically designed handle with neoprene for greater control and comfort. Input power 1350W Impact...

EA5600F45K Chainsaw Model: EA5600F45K 450mm 18″ High power chainsaw (3.0 kW) designed for semi-professionals such as farmers 55.7 mL stratified air purge 2-stroke engine meets strict pollutant emission standards The 2-stroke stratified air scavenger engine has achieved low fuel consumption and reduced harmful exhaust emissions Centrifugal air filter to improve...

EA6100P38E Chainsaw Model: EA6100P38E Gas stratified system that complies with emissions regulations. Low vibration system with damping springs to absorb engine vibrations in the front and integrated rear handles. Improved air filtration; The centrifugal separation system effectively removes dust particles away from the air inlet and reduces dust trapped in...

Impact wrench Model: 6906 3/4″ (19mm) Powerful 588 Nm torque for excellent service applications. Reversible swing-type switch for easy forward or reverse operation. 360-degree adjustable sliding handle for operator convenience at any angle. Accessible external carbons for easy maintenance. Input power: 850W Ability: Standard screw : M16 – M22 (5/8″...

DRV150 Cordless Riveter Model: DRV150 18V LXT BL Brushless Cordless Riveter Jaw designed to allow operation in confined spaces Short center height allows operation in tight spaces, such as close-to-wall riveting. Compatible with various sizes of blind rivets. Compatible rivet diameter: ø2.4mm, ø3.2mm, ø4.0mm, ø4.8mm High speed tightening. Rivet retention...

DRV250 Cordless Riveter Model: DRV250 18V LXT BL Brushless Cordless Riveter Jaw designed to allow operation in confined spaces. Short center height allows operation in tight spaces, such as close-to-wall riveting. Compatible with various sizes of blind rivets. A wide range of nose pieces and jaw pushers allow various sizes...

DUA301 Wireless Height Pruner Model: DUA301 18vX2 LXT 30 cm (12″) battery-powered telescopic height pruner. High cutting efficiency. Lightweight pole saw head to reduce operator fatigue. Power mode for cutting thick branches. Ideal for pruning and cutting branches on tall trees or hard-to-reach areas. Uses: 2 18v batteries Sword: 300mm...

DTW180 Cordless Impact Wrench Model: DTW180 3/8" (9.5mm) 18v LXT Cordless Impact Wrench with 3/8" (9.5mm) 180N m BL brushless motor, reverse rotation auto-stop mode. Lightweight and compact 55mm wide motor part. Reverse rotation auto-stop mode stops in 0.2 seconds after the bolt/nut is loosened enough. The BL motor delivers...

DTW251 Cordless Impact Wrench Model: DTW251 1/2″ (12.7 mm) High level of torque in proportion to weight 230N.m (2,040in.lbs). Compact and provides greater control and maneuverability. Compact, lightweight and high-power 4-pole motor. Luminescent diode with delayed shutdown function. RFE 2 batteries 3.0 Ah 18V + DC18RC Quick Charger Screw capacity:...

Circular Incision Saw Model: SP6000 165mm (6-1/2″) Clean and resistant cut. Durable tip design. Depth stop that allows easy cutting of an existing groove to the depth of 2 mm (1/16″), allowing a chip-free cut. The position of the cutting line is always the same, regardless of the angle of...

Rotary hammer HR1840 Rotary hammer HR1840 18 mm (11/16″) Adapted for SDS-PLUS drill bits. Powerful 440W motor provides 0-2,100 RPM, 0-4,800 IPM and 1.4 J (EPTA Procedure 05/2009) of impact energy for faster drilling Compact with less weight Torque limiting clutch designed to prevent gear damage by automatically disengaging the...

Rotary hammer HR1841F Rotary hammer HR1841F 18 mm (11/16″) Adapted for SDS-PLUS drill bits and LED work light. First Rotary Hammer in the 18 mm (11/16″) category equipped with AVT Anti vibration technology (AVT) The compact AVT is our exclusive mechanism developed especially for small rotary hammers Powerful 470W motor...

Rotary hammer HR2300 220v 720w 1200rpm Makita with ergonomically designed handle to give maximum power thrust and 2 modes of operation: Percussion with rotation and rotation only. Less tip wobble, one-touch chuck for easy tip changes. Change of operating mode by positioning the lever at the bottom of the casing reducing...

AVT system that reduces vibrations for greater user comfort. We change the mode selector to achieve better machine performance. 3 working modes: rotation, rotation + percussion and percussion. Rotation change system that allows you to change the position of the brushes with respect to the armature, thus achieving more power...